#!/usr/bin/python2
# -*- python -*-

"""
=head1 NAME

ipmi_sensor_ - Wildcard plugin for the sensors data provided by ipmi

=head1 AUTHOR

Copyright (c) 2006 Logilab

Inspired by code written by Peter Palfrader

=head1 CONFIGURATION

ipmitool probably needs to be run as root, and it may take more than
10 seconds on some hosts.

Add the following to your /etc/munin/munin-node:

 [ipmi_sensor_*]
  user root
  timeout 20

This plugin does not use environment variables (see section BUGS)

=head1 LICENSE

GNU GPLv2 or any later version

=begin comment

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or (at
your option) any later version.

This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details

You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

=end comment

=head1 BUGS

Plugin reads /etc/munin/ipmi directly, instead of reading environment
variables.

=head1 MAGIC MARKERS

 #%# capabilities=autoconf suggest
 #%# family=contrib

=cut
"""


from subprocess import Popen, PIPE
from os import stat, access, R_OK, F_OK, environ
from os.path import join
from stat import ST_MTIME
from time import time
import sys
import re

CACHEDIR = environ['MUNIN_PLUGSTATE']
CACHEFILE = "plugin-ipmi_sensor.cache"
CACHEAGE = 120
CONFIG = '/etc/munin/ipmi'


def normalize_sensor(name):
    name = name.lower().replace("-", "M").replace("+", "P")
    name = re.sub("[^a-z0-9A-Z]", "_", name)
    return name


def parse_data(data):
    """
    Parse the data returned by ipmitool get which should be of the
    following form:

    Sensor ID              : FAN 1 RPM (0x30)
     Entity ID             : 7.1
     Sensor Type (Analog)  : Fan
     Sensor Reading        : 6150 (+/- 75) RPM
     Status                : ok
     Lower Non-Recoverable : na
     Lower Critical        : 2025.000
     Lower Non-Critical    : na
     Upper Non-Critical    : na
     Upper Critical        : na
     Upper Non-Recoverable : na
     Assertion Events      :
     Assertions Enabled    : lcr-
     Deassertions Enabled  : lcr-

    """
    sensors = {}
    cur_sensor = None
    for line in data.splitlines()[1:]:
        if not line.strip():
            cur_sensor = None
            continue
        if line.startswith("Sensor ID"):
            label, data = line.split(":", 1)
            idm = re.match(r"(.*) \((0x.*)\)", data)
            if not idm:
                continue
            id = idm.group(1).strip()
            cur_sensor = {"id": idm.group(2)}
            sensors[id] = cur_sensor
        if not cur_sensor:
            continue
        if ":" in line:
            label, data = line.split(":", 1)
            cur_sensor[label.strip().lower()] = data.strip()
    return sensors


def get_sensor_names():
    try:
        p = Popen(["ipmitool", "-I", "open", "sensor"], shell=False, stdout=PIPE)
    except OSError:
        return {}
    data = p.stdout.read().decode().splitlines()

    units = {}
    for k, u in UNITS_TO_SENSORS.items():
        units[u['vlabel'].lower()] = k
    sensors = {}
    for line in data:
        columns = [s.strip() for s in line.split('|')]
        key = units.get(columns[2].lower(), None)
        if key:
            lst = sensors.setdefault(key, [])
            lst.append(columns[0])
    return sensors


def get_sensors():
    cache_filename = join(CACHEDIR, CACHEFILE)
    try:
        mtime = stat(cache_filename)[ST_MTIME]
    except OSError:
        mtime = 0
    curtime = time()

    if curtime - mtime > CACHEAGE:
        if not SENSORS:
            try:
                p = Popen(["ipmitool", "-I", "open", "sensor"], shell=False, stdout=PIPE)
            except OSError:
                return {}
        else:
            try:
                p = Popen(["ipmitool", "-I", "open", "sensor", "get", "--"] + SENSORS,
                          shell=False, stdout=PIPE)
            except OSError:
                return {}
        data = p.stdout.read().decode()
        try:
            with open(cache_filename, "w") as f:
                f.write(data)
        except OSError:
            pass
    else:
        with open(cache_filename) as f:
            data = f.read()
    return parse_data(data)


def query_unit(arg):
    m = re.search('_u_(.*)$', arg)
    if not m:
        sys.stderr.write("Could not determine which unit you want based on executable name. "
                         "Acceptable values: {}\n".format(" / ".join(get_sensor_names())))
        sys.exit(1)
    return m.group(1)


UNITS_TO_SENSORS = {
    'volts': {
        'title': "Voltages",
        'args': '--base 1000',
        'vlabel': 'Volts',
        'info': "This graph shows the voltages as reported by IPMI",
        'sensors': ['Voltage 2']},
    'degrees_c': {
        'title': "Temperature",
        'args': '--base 1000 -l 0',
        'vlabel': 'Degrees C',
        'info': "This graph shows the temperatures as reported by IPMI",
        'sensors': ['Ambient Temp']},
    'rpm': {
        'title': "RPMs",
        'args': '--base 1000 -l 0',
        'vlabel': 'RPM',
        'info': "This graph shows the RPMs as reported by IPMI",
        'sensors': ['FAN 1 RPM', 'FAN 2 RPM', 'FAN 3 RPM', 'FAN 4 RPM']},
    'amps': {
        'title': "Amperes",
        'args': '--base 1000',
        'vlabel': 'Amperes',
        'info': "This graph shows the amperes as reported by IPMI",
        'sensors': ['Current 2']},
    'watts': {
        'title': "Watts",
        'args': '--base 1000',
        'vlabel': 'Watts',
        'info': "This graph shows the watts as reported by IPMI",
        'sensors': ['System Level']},
}


if access(CONFIG, R_OK):
    for line in open(CONFIG):
        if line.strip().startswith('#'):
            continue
        data = line.split('=', 1)
        if len(data) != 2:
            continue
        unit, sensors = [d.strip() for d in data]
        if unit not in UNITS_TO_SENSORS:
            continue
        sensor_list = [s.strip() for s in sensors.split(',') if s.strip()]
        UNITS_TO_SENSORS[unit]['sensors'] = sensor_list

SENSORS = []
for v in UNITS_TO_SENSORS.values():
    SENSORS += v['sensors']


def config_unit(unit):
    info = UNITS_TO_SENSORS[unit]
    data = get_sensors()
    print("graph_title IPMI Sensors:", info['title'])
    print("graph_args", info['args'])
    print("graph_vlabel", info['vlabel'])
    print("graph_category sensors")
    print("graph_info", info['info'])
    for lbl in info['sensors']:
        try:
            values = data[lbl]
        except KeyError:
            continue
        nname = normalize_sensor(lbl)

        print("%s.label %s" % (nname, lbl))
        # detect warning and critical ranges
        try:
            assertions = values['assertions enabled'].split()
        except KeyError:
            # Some devices do not provide assertions (e.g. power supplies).  Thus there is no way
            # to guess their warning/critical ranges.  We can skip these.
            continue
        warn_l = warn_u = crit_l = crit_u = ""
        if 'lcr-' in assertions:
            crit_l = values['lower critical'].replace("na", "")
        if 'lnc-' in assertions:
            warn_l = values['lower non-critical'].replace("na", "")
        if 'ucr+' in assertions:
            crit_u = values['upper critical'].replace("na", "")
        if 'unc+' in assertions:
            warn_u = values['upper non-critical'].replace("na", "")
        warn = "%s:%s" % (warn_l, warn_u)
        crit = "%s:%s" % (crit_l, crit_u)
        if warn != ":":
            print("%s.warning %s" % (nname, warn))
        if crit != ":":
            print("%s.critical %s" % (nname, crit))


def config():
    unit = query_unit(sys.argv[0])
    config_unit(unit)


def report_unit(unit):
    info = UNITS_TO_SENSORS[unit]
    data = get_sensors()
    for lbl in info['sensors']:
        nname = normalize_sensor(lbl)
        try:
            value = data[lbl]["sensor reading"].split()[0]
        except KeyError:
            continue
        print("%s.value %s" % (nname, value))


def report():
    unit = query_unit(sys.argv[0])
    report_unit(unit)


def autoconf():
    data = get_sensors()
    if data:
        print("yes")
    else:
        print("no (no ipmitool output)")


def suggest():
    names = get_sensor_names()
    if not access(CONFIG, F_OK):
        with open(CONFIG, "w") as f:
            for key, sensors in names.items():
                f.write("%s = %s\n" % (key, ",".join(sensors)))
    for key in names.keys():
        print("u_%s" % key)


def debug():
    print(SENSORS)
    data = get_sensors()
    for key, value in data.items():
        print("%s: %s (%s - %s) [%s - %s] %s" % (key, value['sensor reading'],
                                                 value['lower non-critical'],
                                                 value['upper non-critical'],
                                                 value['lower critical'], value['upper critical'],
                                                 value['assertions enabled']))


def main():
    if len(sys.argv) > 1:
        command = sys.argv[1]
    else:
        command = ""
    if command == "autoconf":
        autoconf()
    elif command == "suggest":
        suggest()
    elif command == 'config':
        config()
    elif command == 'debug':
        debug()
    else:
        report()


if __name__ == "__main__":
    main()